[Not Solved]
Apr 12, 2017, 05:09 PM
(This post was last modified: Apr 12, 2017, 07:21 PM by Lt Hawk.)
Greetings, fellow htpc junkies. I just recently started using nzb and its glorious tools. I was able to successfully route all of them thru the 'vpn' user and our Nginx reverse proxy. Radarr, sonarr, and sabnzbd are all accessible from https://my.ddns.net/sonarr etc. However, I cannot figure out how to translate that to nzb360 with the way it is set up. I had no issues with transdrone. But I can't seem to get it here. Tips? =)
Edit: Forgot to mention that my ISP blocks inbound tcp80 and tcp443 connections. Therefore, I have a virtual server setup thru my router. What this means is, my router listens on ports xxxxx and yyyyy and will forward to 192.168.x.x ports 80 and 443. using this: https://my.ddns.net:yyyyy/sonarr works. the above example does not.
Extra Edit: with further tinkering i have solved this.
Here is how:
Let us use sabnzbd for this example.
IP/Host:
Enter remote host only as instructed
Local network ssid:
with our particular situation we cannot use a local net setup.
server port for SABnzbd:
xxxxx/sabnzbd - where xxxxx is the port you chose on your router to listen for port 80 or 443 NOT the listening port for SABnzbd
everything else should work as instructed within the app.
Edit: Forgot to mention that my ISP blocks inbound tcp80 and tcp443 connections. Therefore, I have a virtual server setup thru my router. What this means is, my router listens on ports xxxxx and yyyyy and will forward to 192.168.x.x ports 80 and 443. using this: https://my.ddns.net:yyyyy/sonarr works. the above example does not.
Extra Edit: with further tinkering i have solved this.
Here is how:
Let us use sabnzbd for this example.
IP/Host:
Enter remote host only as instructed
Local network ssid:
with our particular situation we cannot use a local net setup.
server port for SABnzbd:
xxxxx/sabnzbd - where xxxxx is the port you chose on your router to listen for port 80 or 443 NOT the listening port for SABnzbd
everything else should work as instructed within the app.