I followed the guide for split tunneling with VPN to a T on a fresh 16.04 install. Only minor difference is I use a different VPN than PIA but was able to pull in the config okay. The VPN works great, the only issue is that both the normal user and the vpn user both go through the tunnel. The output of:
and
are the same, both showing the VPN IP and connection info.
It would seem that the routing is not working correctly? Any ideas where to start looking?
Thanks!
Code:
curl ipinfo.io
Code:
sudo -u vpn -i -- curl ipinfo.io
It would seem that the routing is not working correctly? Any ideas where to start looking?
Thanks!