Hi,
I'm back again!
It all went very well untill just now :_ I wanted to install a second hdd and I occidentally wiped everything.. Any idea which command this was? (so I can safely install a hdd in future use. I got to the point where I named the two hdd's SDA1 and SDB1.. But in kodi the two hdd are the same size and are mounted under the same tree (usbstorage) and n ot usbstorage and usbstorageII as I intended
BLKID:
/dev/mmcblk0: PTUUID="0004a452" PTTYPE="dos"
/dev/mmcblk0p1: SEC_TYPE="msdos" UUID="4F72-0755" TYPE="vfat" PARTUUID="0004a452-01"
/dev/mmcblk0p2: UUID="18bb9f0f-3eb8-4584-9e2a-c19cd2b58d1e" TYPE="ext4" PARTUUID="0004a452-02"
/dev/sda1: LABEL="LACIE" UUID="6ED80DA3D80D6B23" TYPE="ntfs" PARTUUID="12345678-01"
/dev/sdb1: LABEL="500GBHDD" UUID="01D1029BBE0FFBC0" TYPE="ntfs" PARTUUID="be139800-01"
In the sudo nano fstab file I have this set up
/dev/mmcblk0p1 /boot vfat defaults 0 2
/dev/mmcblk0p2 / ext4 errors=remount-ro,noatime 0 1
/dev/sda1 /mnt/usbstorage ntfs nofail,defaults 0 0
/dev/sdb1 /mnt/usbstorageII ntfs nofail,defaults 0 0
fdisk -l
Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 16 97727 97712 47.7M b W95 FAT32
/dev/mmcblk0p2 97728 31116287 31018560 14.8G 83 Linux
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x12345678
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 63 976768064 976768002 465.8G 7 HPFS/NTFS/exFAT
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xbe139800
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 976766975 976764928 465.8G 7 HPFS/NTFS/exFAT
Do you have any idea what could possibly be wrong? (I just guess that you do..
)
Thanks in advance!!
Jelle